The HP-customized BIOS handles voltage and fan curves differently than retail MSI boards. Steps to Fix High Temperatures on MS-7613 1. Address the Cooler (The Most Likely Cause)
However, when you are in the BIOS, .
Sometimes, corrupt BIOS configurations or stuck fan controller states cause the motherboard to panic and default to 100% fan speed and higher voltage. You can reset the BIOS to factory defaults: Turn off the computer and unplug the power cord.
If you are entering the BIOS to try and adjust fan curves or undervolt a hot processor, you will face heavy limitations: Locked Settings: ms7613 ver 11 bios hot
Remove the CPU cooler, clean off the old paste using isopropyl alcohol, and apply a fresh, high-quality thermal compound (like Arctic Silver or Noctua NT-H1). 2. Clogged Heat Sinks and Dead Fans
If your PC boots to an error screen stating "CPU Fan Error" or displays abnormally high temperatures in the BIOS (e.g., > 60∘C60 raised to the composed with power cap C at idle), the issue is usually one of three things:
While these sites can be helpful for finding older dumps of the Bios.Bin file, they carry inherent risks: The HP-customized BIOS handles voltage and fan curves
: If the system was previously overclocked or had custom voltage settings, enter the BIOS (press F10 or Del during boot) and select Load Setup Defaults to ensure the CPU is running at its intended voltage.
Clean the CPU and heatsink with isopropyl alcohol.
Are you experiencing after a hardware upgrade? As of 2025
We tested the unlocked ms7613_11_hot BIOS with a Xeon X3470 (2.93GHz), 16GB DDR3-1333, and an RX 580.
Suddenly, the motherboard emitted a loud, high-pitched whine. Alex was startled and jumped back from the computer. The whine grew louder and louder, until it became almost deafening.
If you are dealing with a hot MS-7613 motherboard or processor while in the BIOS interface, Why Does the CPU Get Hot in the BIOS?
As of 2025, MSI no longer hosts this BIOS on their official site. However, verified clean copies exist on archive.org and BIOS repositories. The recommended stable version is (dated 06/23/2010), while the “hot” enthusiast version is V3.2b (beta, with unlocked EFI variables).