Rok Power Washer Instructions Jun 2026

: Choose a nozzle based on the surface being cleaned (e.g., a wide-angle nozzle for delicate surfaces or a narrow-angle for tough stains).

Follow these sequential steps to assemble and connect your ROK power washer properly. Step 1: Connect the Water Supply

Crucially, . Running the pump dry is the fastest way to destroy its internal seals. Once the water is flowing from the tap, squeeze the trigger on the spray gun for about 30–60 seconds while the power is still OFF . This "primes" the system by purging air pockets that cause the motor to stutter or pulsate. Phase 2: Engaging the Power rok power washer instructions

Pinpoint stream; removing stubborn rust or concrete stains. Use with extreme caution.

General cleaning; washing decks, siding, walkways, and patio furniture. : Choose a nozzle based on the surface being cleaned (e

To resolve this, try the following approach:

General cleaning. Ideal for decking, siding, and washing cars. Running the pump dry is the fastest way

Plug the power cord directly into a grounded RCD-protected mains outlet. Avoid thin extension cords. Turn the main water tap fully on and purge the air.