Upon completing Cisco Lab 162, participants gain hands-on experience in:
interface gigabitethernet 0/0/0 description Link to Network A ip address ipv6 address no shutdown exit copy running-config startup-config . 4. Verification and Troubleshooting
The following table serves as a quick-reference checklist for the global configuration commands mandated in this lab: 1.6.2 Packet Tracer - Configure Basic Router Settings
Reading the solution is step one. The true mastery of comes when you close the lab manual, open Packet Tracer (or GNS3/EVE-NG), and build the topology cold. cisco+lab+162
Securing the control and management planes prevents unauthorized access to the network infrastructure. 1. Enforcing Password Length and Global Encryption
Configuring VLANs (Virtual Local Area Networks) to segment network traffic.
Tip: Lab 1.6.2 often asks you to manually set the Link-Local address to fe80::1 to make troubleshooting easier. Step 2: Implementing EUI-64 Upon completing Cisco Lab 162, participants gain hands-on
R1(config)# line con 0 R1(config-line)# password cisco R1(config-line)# login R1(config-line)# logging synchronous R1(config-line)# exit R1(config)# line vty 0 4 R1(config-line)# password cisco R1(config-line)# login R1(config-line)# transport input ssh R1(config-line)# exit Use code with caution. R1(config)# banner motd #Authorized Access Only# Use code with caution. Part 2: Interface Configuration (IPv4 and IPv6) Configure G0/0/0:
If the ping is successful (replies received), congratulations! You have successfully configured Inter-VLAN routing. The first ping might time out due to ARP processes, but subsequent pings should succeed.
Cisco Lab 162 comes with a range of features that make it an ideal platform for network configuration and troubleshooting. Some of the key features include: The true mastery of comes when you close
interface fastEthernet 0/3 switchport mode access switchport access vlan 20 no shutdown
addressing on host devices and router interfaces.
Cisco Lab 162 is typically part of the Scaling Networks or Enterprise Networking modules. The standard topology consists of:
Generate RSA keys with crypto key generate rsa (1024-bit modulus) and create a local user. Interface Configuration
To get the most out of Cisco Lab 162, here are some tips and best practices: