Sunrise Fan — Manual ((hot))

: Unplug the fan when it is not in use, being moved, or being cleaned. Sunrise Tradex Portable Fans

: Do not immerse the fan, plug, or cord in water or spray them with liquid. : Always use on a dry, level surface.

Secure the pole from the underside of the base using the provided plastic thumb screw or locking nut. Turn clockwise until tight.

Vacuum the front and rear grilles using a soft brush attachment to remove dust buildup.

Place the fan on a dry, level, and stable surface during operation to prevent tipping. sunrise fan manual

Indoor ceiling models, like the TroposAir Sunrise series , balance seasonal indoor temperatures. Crucial Safety Rules SunRise Solar-Powered Attic Fan - Best Materials

For remote panel models, ensure the solar panel is installed within 15 feet of the fan housing (unless using an extension wire).

The manual for Sunrise fans varies significantly depending on whether you have a , a portable pedestal/wall fan , or a ceiling fan . 1. SunRise Solar-Powered Attic Fans

: The fan turns on automatically when attic temperatures rise to 80°F . : Unplug the fan when it is not

Fasten the fan blades to the blade brackets using the blade screws and fiber washers.

Slide the fan blade onto the motor shaft. Ensure the slots on the back of the blade match the retaining pins on the shaft.

Do not operate any fan with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer or a qualified technician.

properly snapped into place. To maintain efficiency, the motor requires clear airways; use a vacuum or a damp cloth to remove dust buildup from the rear vents every month. 4. Troubleshooting If the fan fails to start, check the Secure the pole from the underside of the

Do not insert fingers, pencils, or other objects through the guard grills while the fan is running.

Align the holes, insert the hitch pin, and secure it with the cotter pin. Tighten the set screws on the motor yoke firmly. 3. Hanging the Fan Lift the fan assembly into the mounting bracket.

• Firmly plug the cord into a functional outlet.• Test the outlet with another device.• Reset your home breaker panel.