Niton Xlt 898 User Manual Jun 2026

Flush the nose cone completely flat against the metal surface to prevent X-ray leakage. Pull and hold the trigger. For standard alloys, a 5 to 10-second burn is sufficient for accurate grade identification. Mining and Soil Environmental Modes

Always check the thin Kapton or Prolene measurement window located at the front nozzle for punctures, dust buildup, or residual metallic particles. Slide a fully charged Lithium-ion battery pack into the base of the handle until it securely clicks into position. If swap-outs are needed during prolonged field sorting, the hot-swap system retains temporary volatile memory so you can change batteries without forcing a hard system reboot. 2. System Power-On and Security Access

The test will run for a predetermined time (usually 30 to 60 seconds). Ensure the screen reads before moving forward. If it fails, clean the window and re-test. Step 3: Sample Preparation

: You can find manuals, software, and technical documentation by searching for the instrument name on the Thermo Fisher Scientific Resource Center . Niton Xlt 898 User Manual

Connect the analyzer to a computer using the provided serial or USB interface cable.

Place the analyzer snout flush against the factory-provided tungsten (W) or certified reference material standard.

Snap or screw the retaining ring back into place, ensuring there are no wrinkles in the film. Battery Storage Protocols Never store batteries in a fully discharged state. Flush the nose cone completely flat against the

Inquire about the process for for non-standard matrices or custom mineral ores. Share public link

Clean the casing with a damp cloth. Never use solvents.

Remove rust, paint, dirt, oil, scale, and plating from the test area. Use a grinder or wire brush if necessary. Mining and Soil Environmental Modes Always check the

Model: XLt 898

Save the exported files as encrypted data logs or convert them into standard CSV spreadsheets for review in Microsoft Excel. 7. Routine Maintenance and Troubleshooting

Open the software package on your computer. Download the internal data logs.

| Parameter | Value | |-----------|-------| | | 1.3 kg (2.9 lb) with battery | | Dimensions | 25 × 9 × 28 cm (10 × 3.5 × 11 in) | | Battery life | 6–8 hours continuous use | | Operating temp | -10°C to 50°C (14°F to 122°F) | | Storage temp | -20°C to 60°C (-4°F to 140°F) | | Humidity | 10–90% non-condensing | | Warm-up time | < 2 minutes from cold start |

Ensure the window is clean and you are using the correct calibration standard.