An+prc158+manual -
AN/PRC-158 Manpack Radio: The Ultimate Technical and Operational Guide
Rotate the power switch to the ON position. The radio will initiate a Built-In-Test (BIT) to check internal systems. 3.2 Loading Waveforms and Keys
Supports a broad portfolio including narrowband, wideband, and fast-hop resilient waveforms like ARROW (30-512 MHz).
Press the button to toggle between Channel 1 and Channel 2. Select PRESET to load predefined frequency profiles. To manually configure a waveform: Select MENU > WAVEFORM SELECT . Choose your desired protocol (e.g., TSM or SINCGARS ). Enter the net ID, frequency hopset, or IP configuration. Press ENTER to commit the changes. 4. Maintenance and Troubleshooting an+prc158+manual
Connect a specialized UHF SATCOM antenna (e.g., AV 2040 or a wearable satellite antenna) to the designated channel.
Launch the Communications Planning Application (CPA) or Joint Enterprise Network Manager (JENM) tool to load pre-planned mission profiles.
This radio allows users to run two independent, simultaneous channels (e.g., VHF/UHF line-of-sight and SATCOM) in one compact unit. Press the button to toggle between Channel 1 and Channel 2
The AN/PRC-158 features a NSA-certified Type 1 cryptographic architecture.
Attach the authorized Falcon IV battery to the base of the unit.
Which or network you are attempting to configure (e.g., SINCGARS, TSM-X, MUOS). The exact error message or behavior you are encountering. What peripherals or fill devices you are using. Choose your desired protocol (e
Attach the flexible whip antenna or blade antenna to the designated channel port.
Connect the SKL fill cable to the data/fill port on the front panel of the radio.
















