Zte - F689 Bridge Mode Exclusive Exclusive

Input the exact noted in Step 2 if the field clears.

Always check your ISP’s support policy — some providers forbid bridge mode or require advanced VLAN configuration. If in doubt, document original settings before making changes.

Select your active internet connection profile from the dropdown menu. zte f689 bridge mode exclusive

You must perform this configuration over a wired connection to avoid getting locked out when Wi-Fi drops. Step-by-Step Configuration Guide

:

“First – delete all WAN connections except TR069. Then click ‘Add’.”

This creates a for your traffic while keeping a backdoor into the modem. Input the exact noted in Step 2 if the field clears

Check the box for (or whichever physical port you plan to connect to your third-party router). This tells the ZTE F689 to send the bridged data strictly through that specific port. Save your changes. Step 5: Disable Wi-Fi and DHCP

To help tailor any further advice, let me know: What are you using with this router, and what brand/model is your new third-party router? Knowing if your connection uses PPPoE or Dynamic IP would also help troubleshoot. Select your active internet connection profile from the

ISPs often require a clean ARP table flush. Power down both devices for five full minutes, then boot the ZTE gateway completely before powering up your personal router.