Amt-78 User Manual Jun 2026

: The board has dedicated terminals for external LED flashing lights to enhance the ride's visual appeal.

3.8 Diagrams, drawings, and parts

Supports 110V/220V AC input; some models are designed for 12V or 24V DC systems. Operating Output: Supports a current output of up to 10A . amt-78 user manual

To ensure your scheduled programs run at the correct times, you must first configure the current day and time. throughout this process.

Press if you need to lock the data on the screen for manual logging. Data Logging and Export : The board has dedicated terminals for external

Press the key briefly once. The lower display digits will begin flashing.

: You can set the ride duration from 1 to 10 minutes per coin session. To ensure your scheduled programs run at the

Connect your live (L) and neutral (N) power wires here. Terminals 3 & 4 (Reset & Gate Inputs):

Use the UP or DOWN buttons to adjust the session duration between 1 and 10 minutes. Press SET again to save your profile. Step 2: Audio Customization and SD Setup

Check the AC220V EU cable connection. If the switch LED is not lit, the PCB is not receiving power.

Verify sensor selection matches the configured InP parameter. Lack of incoming main power.