Narishige Pc10 Manual New Jun 2026

Decrease the Heat level or increase Magnet 2 force.

The Narishige PC-10 is designed to produce consistent, high-quality glass capillaries, micropipettes, and patch clamps. Utilizing a vertical pull mechanism driven by gravity and electromagnetics, it allows researchers to manipulate both the heating and pulling parameters across two distinct stages. Key Specifications

: Includes two light (approx. 25g) and two heavy (approx. 100g) weights for fine-tuning tension.

Produces longer, thinner, and more flexible tips. narishige pc10 manual new

Place the instrument on a vibration-free, level laboratory bench.

Detailed operational settings and maintenance tips can be found in the Narishige PC-10 User Manual.

Note the value where the glass just begins to stretch. This is your baseline softening point. Common Troubleshooting Scenarios Probable Cause Corrective Action Heat setting is too low Decrease the Heat level or increase Magnet 2 force

Ensure the dust cover is closed. Check if one side of the coil is closer to the glass than the other. Dirt or debris on vertical guide shafts

: Use a high first-stage temperature to initiate melting and a lower second-stage temperature to refine the tip resistance. 5. Maintenance and Troubleshooting

Because every great micropipette begins with a great manual. Key Specifications : Includes two light (approx

For consistent results, the glass capillary must be perfectly centered within the heating coil. Users should loosen the heating element positioning screw to align the heater block before tightening.

: Pulling temperatures must be adjusted based on ambient lab temperature and the "age" of the heating filament. 4. Operational Best Practices

Loosen the upper and lower clamping knobs on the vertical sliding mechanism.