Xiaomi Mi Aiot Router Ax6000 Default Password New ✦ Premium

The Xiaomi Mi AIoT Router AX6000 no longer has a traditional default password. The "new default" is a requiring app-based claiming. This reduces the risk of drive-by admin login attacks but increases dependence on the manufacturer’s cloud authentication. For security researchers and owners:

Plug an Ethernet cable from your modem or broadband wall port into the blue on the back of the

The app should automatically detect the AX6000 via its AIoT antenna.

The most common default IP address for Xiaomi routers is 192.168.31.1 . You can also use the web address miwifi.com . xiaomi mi aiot router ax6000 default password new

: When you first connect to the router (via 192.168.31.1 or miwifi.com ), the system will prompt you to set a new administration password.

The router will ask you to set up a new (for accessing 192.168.31.1 ) and a Wi-Fi Password (for connecting devices).

Best for advanced users who want access to detailed settings like port forwarding, VPN configuration, and DHCP reservation. Access it via 192.168.31.1 . Method 2: Mi Home / Xiaomi Home App The Xiaomi Mi AIoT Router AX6000 no longer

Scan for Wi-Fi networks on your phone or computer. Connect to the default SSID (e.g., Xiaomi_XXXX ) using the password printed on the sticker.

The AX6000 has a dedicated AIoT (Artificial Intelligence of Things) antenna that automatically detects and connects to Xiaomi smart home devices without you entering the Wi-Fi password. This does not affect the default login credentials.

: The LED will turn from blue to yellow during the process. Once it reboots, the settings are back to defaults. For security researchers and owners: Plug an Ethernet

This is where the "default password" is replaced.

Open a web browser and type 192.168.31.1 in the address bar.

Click "Finish" or "Save." The router will save your settings and restart. Once the restart is complete, your new, secure Wi-Fi network will be active. Connect your devices using the Wi-Fi name and password you just created.

Because there is no default admin password. You must go through the app setup to create one. If you bought the router used, perform a hard reset (see above).

This sticker password is what you need to connect to the Wi-Fi and log into the admin panel for the first time .