Jinka Jk 1351 Driver Software -

This means the software is looking at the wrong virtual port. Check Device Manager to see if your COM port number changed (this happens frequently if you plug the USB cable into a different physical slot on your computer). Match the COM port in your software's connection settings perfectly to the one shown in Device Manager.

Plug the cutter into your PC via USB and turn it on. Open Windows Device Manager . Look under Other Devices or Ports (COM & LPT) . If you see a device with a yellow warning triangle labeled "CH340" or "USB-Serial Controller," that indicates which driver you need.

The most stable connection type for vinyl cutters. It requires a physical serial port on your PC or a high-quality USB-to-Serial adapter. jinka jk 1351 driver software

Users often report difficulty with USB recognition. If the software does not "see" the plotter:

The is a large-format entry-level cutting plotter primarily designed for "cut-only" tasks such as vinyl stickers and heat-transfer decals. Its software environment consists of a base USB driver for communication and specialized cutting software for design and execution. 1. Official Driver Software This means the software is looking at the wrong virtual port

Note down the exact number (e.g., ). You will need this number for your cutting software. Step 3: Configuring Your Cutting Software

Open the Windows , go to Hardware and Sound , and click on Devices and Printers . Plug the cutter into your PC via USB and turn it on

Plug the USB cable into a USB 2.0 port on your computer (avoid USB 3.0 blue ports if possible, as legacy plotters occasionally experience data packet loss on USB 3.0). Turn on the Jinka JK 1351 power switch. 4. Verify the COM Port Assignment

Jinka JK 1351 driver and software are essential for connecting your computer to the cutting plotter. Most users require both a hardware driver (to recognize the USB/Serial connection) and specialized cutting software (to send designs to the machine). 📥 Driver Downloads