Introduction Tachosoft Airbag Resetter V6.4 is a specialized software tool used to diagnose, read, and reset airbag (SRS — Supplemental Restraint System) fault codes and crash data stored in vehicle control modules. Operating within the broader market of automotive diagnostic and ECU programming utilities, this tool targets automotive technicians, auto electricians, salvage-repair shops, and advanced DIYers who need to restore vehicles to a drivable, legally compliant condition after airbag deployment or after SRS-related faults have been repaired.
| Error Message | Likely Cause | Solution | |---------------|--------------|----------| | No response from programmer | Wrong COM port or driver | Change COM port in Device Manager; reinstall drivers | | Chip not recognized | Incorrect chip selection | Manually check chip markings; use auto-detect if available | | Checksum error after write | Corrupt original dump | Restore backup and use “Fix Checksum” tool before writing | | Airbag light still on after reset | Module has physical damage or incomplete erase | Check crash sensors, seatbelt pretensioners; run secondary reset | | Software crashes on Windows 10 | Compatibility mode needed | Run as Windows 7, administrator, and disable Data Execution Prevention (DEP) for the .exe |
24C02, 24C04, 24C08, 24C16, 95040, 95080, 95160, 95320, 95640
Write the newly generated clear_dump.bin file back onto the EEPROM chip using your hardware programmer. Resolder the chip if it was removed, reassemble the module casing, and mount it securely back into the vehicle. Connect the battery and scan the system with a standard OBD2 diagnostic scanner to confirm the airbag light is gone. Advantages of Using TachoSoft v6.4 tachosoft airbag resetter v6.4
– Write the cleaned binary to the chip.
Click the or Calculate button. The software applies its algorithm to wipe out the crash records while preserving local configuration data.
TachoSoft v6.4 is powerful but dangerous in untrained hands. Introduction Tachosoft Airbag Resetter V6
from an official distributor or your programmer’s companion CD.
DIYfixer Topic: TachoSoft Airbag Resetter v6.4
is a specialized automotive software tool designed to clear permanent "crash data" stored in a vehicle's Airbag Electronic Control Unit (ECU) after an accident. While standard OBD2 scanners can clear temporary codes, they often cannot erase the hard-coded crash data that prevents an airbag module from being reused. Core Capabilities Resolder the chip if it was removed, reassemble
While a full list is extensive, the V6.4 software is known to support modules from a vast range of manufacturers. Based on user reports, it has been successfully used on the following:
: Save the newly cleaned dump and use your programmer to write it back onto the EPROM chip.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.