If you notice circles printing as ovals, your belts may be loose. Check the tension of the X and Y belts; they should feel taut like a guitar string when plucked gently. Tighten them using the tensioners located at the ends of the axes.
Tighten or loosen the plastic thumb nut under that specific corner until you feel a slight friction/resistance when tugging the paper.
Take the extruder assembly and place it on the carriage, securing it with the provided screws. qidi x-pro manual
Tap to move to the third point, adjust the nut, and repeat the process one final time to verify consistency across all points. 4. Filament Loading and Unloading Loading Filament
Slide the provided QIDI leveling paper (or a standard piece of A4 paper) between the nozzle and the heated bed. If you notice circles printing as ovals, your
Place the provided QIDI leveling paper (or a standard piece of A4 paper) on the heated bed.
The is a dual-extruder 3D printer known for its sturdy build and versatility with multiple materials. Since physical manuals can sometimes be misplaced, this guide synthesizes the essential operational steps from the QIDI Wiki and official documentation. 🛠️ Getting Started Tighten or loosen the plastic thumb nut under
Heat the desired extruder to the printing temperature of the loaded material. Tap on the touchscreen. Wait for the printer to reverse the drive gears.
Apply a bit of the included glue stick to the removable magnetic plate for better adhesion. 4. Software and Slicing
You can monitor the print process directly on the touchscreen. The X-Pro also features breakpoint printing , allowing it to resume after a power failure. 6. Maintenance and Troubleshooting Proper maintenance ensures the longevity of your X-Pro.