Set the soldering iron dial to exactly 300°C and let it heat for 5 minutes.
Always tin the soldering tip with a small amount of fresh solder before placing it back into the stand. This prevents oxidation. Safety Precautions
Immediately power off the unit. Check the underside to ensure the shipping transit screw was completely removed. 🧼 Maintenance and Care gordak 952 user manual updated
The factory default calibration is often inaccurate by +/- 15°C. Perform this updated calibration routine before your first use.
Apply heat to the component, moving the gun to prevent overheating one area, and lift the component with tweezers. Set the soldering iron dial to exactly 300°C
Clean the soldering tip regularly using a damp sponge or brass wool. Do not file the tip.
Turn on the hot air power switch. The pump will engage immediately. Safety Precautions Immediately power off the unit
Leo added a troubleshooting section for the dreaded "Dead Screen" syndrome common in newer VFD models. He documented that many units suffered from firmware crashes due to noisy power lines. His "Updated Manual" suggested a simple hardware fix: adding a real power switch to the back to truly kill the power to the transformers, preventing the "phantom power" draw that keeps the unit warm even when it’s supposedly off.
Adjusts the target temperature for the hot air gun.