Chouchin Radio Controlled Clock Instructions: Ch-899

: The clock will stay still at 12:00 while it searches for a signal. This can take anywhere from 3 to 12 minutes

The clock is trying to calibrate its internal position or searching for a signal. If it spins for more than 20 minutes without stopping, the battery voltage is likely too low to power the receiver chip. Replace it with a brand-new Alkaline battery. The clock stopped exactly at 12:00 (or 4:00 / 8:00).

Initial setup (first-time install)

Does your specific model have any on the back besides REC and SET? ch-899 chouchin radio controlled clock instructions

Wait up to 15 minutes. If it does not move, the signal strength is too weak. Move the clock near a window and press the RESET button. The clock displays the wrong hour (Time Zone Issue)

: Once at 12:00, the clock stays still while searching for a radio signal. This usually takes 4–10 minutes

| Icon | Meaning | |------|---------| | Flashing tower | Searching for signal | | Solid tower | Connected / last sync successful (usually within 24h) | | No tower | No recent reception (manual setting needed) | : The clock will stay still at 12:00

Forces the clock to search for the atomic radio signal immediately.

The clock will then turn off its motor and enter . Step 3: Waiting for Synchronization

Press and hold the button for 3 to 5 seconds. The hands will begin to move. Hold the SET button down to move the hands quickly. Replace it with a brand-new Alkaline battery

: Before inserting the battery, set the Time Zone switch to your local zone (e.g., P, M, C, or E for Pacific, Mountain, Central, or Eastern) and ensure the DST switch is in the ON position if you live in an area that observes daylight saving.

Note: Even when set manually, the CH-899 movement will still attempt to search for a radio signal overnight to override the manual setting with perfect atomic time. Force a Radio Signal Search (REC Function)

The clock will enter "Signal Reception Mode." The hands will remain still while the internal receiver scans for the atomic radio signal. This process can take anywhere from 3 to 12 minutes.

I understand you're looking for the paper instructions for the . However, I cannot physically give you a paper copy — I can only provide digital text or guidance.