Xps 13 9370 Hackintosh [WORKING]

The Dell XPS 13 9370 is an exceptional piece of hardware, boasting a stunning 13.4-inch InfinityEdge display, up to 16 hours of battery life, and a compact, lightweight design. By installing a Hackintosh on this device, you can:

Avoid Samsung PM981/PM981a (causes kernel panics). Crucial, Western Digital, and Kingston work well. Killer 1435 (Qualcomm Atheros) Supported via OpenIntelWireless / AirportItlwm drivers. Audio Realtek ALC299 Supported using AppleALC (Layout ID 21, 22, or 32). Prerequisite Tools & Assets

remains one of the best value Hackintosh laptops, even in 2026. While the process requires patience, the result is a stable, portable machine that performs excellent work. With the 8th Gen processor, you can easily use it for modern versions of macOS. xps 13 9370 hackintosh

Before you begin, make sure you have the following ready. Skipping any of these steps is the most common cause of installation failures.

The config.plist file is the brain of your OpenCore setup. Use ProperTree to open the sample plist provided by OpenCore, perform a "Clean Snapshot" to automatically link your Kexts and SSDTs, and edit the following fields based on the Kaby Lake Laptop guide: Target Device Properties ( DeviceProperties ) The Dell XPS 13 9370 is an exceptional

The stands out as one of the most reliable Intel-based laptops for building a sleek, portable Hackintosh . Powered by an 8th-generation Intel Kaby Lake Refresh processor and paired with Intel UHD 620 graphics, its internal architecture aligns closely with real Intel-based MacBooks, making it an excellent platform for running macOS.

You must configure the BIOS correctly, or macOS will not boot. Set to "Thorough". While the process requires patience, the result is

To boot macOS, the Dell XPS 13 9370 BIOS must be configured precisely. Incorrect settings will result in immediate kernel panics during the boot sequence.

Change to Disabled (or keep enabled if you use DisableIoMapper in OpenCore). Fast Boot: Change to Thorough . USB Wake Support: Change to Enabled . Save changes and exit. Step 2: Creating the EFI Folder Architecture