Canon Service Tool V5610 Official

Once your printer is in Service Mode, connect it via a (Wi-Fi will not work) and open the software.

Turn the printer off, wait 10 seconds, and turn it back on normally. Critical Safety and Troubleshooting Warnings

Modifies the localized market settings of the printer firmware. Understanding the "Waste Ink Pad" Issue

While still holding Stop, press and hold the Power button. The power LED will light up. canon service tool v5610

The is an official maintenance utility designed for professional technicians to calibrate, diagnose, and reset Canon PIXMA and MAXIFY inkjet printers. Its most common use is clearing the "Waste Ink Pad Full" error (Support Code 5B00). 🛠️ Key Capabilities

The software window will open. If your printer is correctly in Service Mode, all buttons on the user interface will be active (not grayed out). 3. Clear the Waste Ink Counter

When you reset the counter using v5610, you should simultaneously: Once your printer is in Service Mode, connect

The software will automatically detect your connected printer on the USB port. Locate the section. Set the Absorber dropdown menu to Main . Click the Set button right next to it.

Before attempting to use the V5610 tool, verifying its compatibility with your specific printer model is paramount. Using an incompatible version can cause severe damage to the printer's logic board. The tool is reported to support over 385 different Canon printer models, including but not limited to:

Once the printer is successfully idling in Service Mode, follow these steps to reset the counter: Understanding the "Waste Ink Pad" Issue While still

Look at the top right corner to ensure your printer's connected USB port is automatically detected. Locate the section on the Main tab.

Its primary role is to reset the internal counter for the waste ink absorber, allowing the printer to resume operation after it has reached its software limit.