Toyota 5afe Engine Service Manual New < 2024 >

He found the culprit near midnight: a worn shim, thinner than a dime, throwing the rhythm of the third cylinder out of sync. He consulted the manual’s clearance charts, his eyes darting between the micrometer and the printed specifications. 0.20mm for intake.

Unbolt the upper and lower plastic timing belt covers.

Turn the ignition switch to ON, but do not start the engine. toyota 5afe engine service manual new

Remove the drive belts (alternator, power steering, A/C). Support the engine with a jack and remove the right-hand engine mount. Remove the spark plugs to eliminate compression when turning the crank.

| Symptom | Likely Cause | Remedy | |---------|--------------|--------| | Rough idle | Vacuum leak (gasket/ISCV) | Re-seal intake manifold | | No start (cranks) | Cam/crank timing off | Re-check chain alignment | | High fuel consumption | O2 sensor slow | Replace sensor (DENSO 234-4056) | | Overheating | Air in system | Vacuum fill coolant, bleed heater core | He found the culprit near midnight: a worn

Loosen the tensioner bolt, install the belt counter-clockwise, release the tensioner spring, and torque the bolt to 37 Nm.

Remove the timing belt as detailed above. Uniformly loosen the camshaft bearing cap bolts in reverse order of assembly to prevent cam warping. Lift out the camshafts. Unbolt the upper and lower plastic timing belt covers

Using the Toyota 5AFE engine service manual can provide several benefits, including: