Cerwin Vega At40 Specs

Pros:

Are you curious about how the AT-40 compared to its larger sibling, the AT-100, or do you have another specific model in mind?

The is a vintage 3-way floor-standing speaker known for its high sensitivity and punchy bass, making it a popular choice for high-energy music like rock and dance. According to specifications from Classic Audio , these speakers were part of the "AT" (Arc) series and featured a 10-inch woofer, a dedicated midrange driver, and a tweeter. Key Technical Specifications Specification System Type 3-Way, Bass Reflex (ported) Frequency Response 30 Hz – 22 kHz Power Handling 125 Watts (RMS) Sensitivity 95 dB (1 Watt @ 1 Meter) Nominal Impedance Crossover Frequencies 400 Hz / 3,000 Hz Protection PTC (Positive Temperature Coefficient) for tweeter safety Dimensions 730 mm (H) x 365 mm (W) x 320 mm (D) Driver Composition cerwin vega at40 specs

Part of the legacy intended for "concert-level sound" in a home environment Cerwin-Vega Legacy refoaming guide for these specific speakers?

Outfitted with Cerwin-Vega's iconic red/orange polyurethane foam surround. The 10-inch driver hits cleanly down to 30 Hz, offering punchy, rapid-fire mid-bass that works exceptionally well for rock, hip-hop, and electronic music. 2. Mid-Range Driver Size: 5 inches (12.7 cm) cone Pros: Are you curious about how the AT-40

Takes over at 400 Hz and extends up to 3,000 Hz. This dedicated mid-range ensures that vocals and instruments retain distinct separation from the heavy bass frequencies generated by the woofer. 3. High-Frequency Driver (Tweeter) Size: 1 inch (2.54 cm) Type: Polycarbonate or microcell polymer dome tweeter.

The is a legendary vintage 3-way, bass-reflex floorstanding loudspeaker celebrated for its live-concert dynamics, punchy bass, and exceptionally high efficiency . Released during the heyday of the brand's residential audio dominance, the AT-40 represents a mid-sized sweet spot in the AT (Audio Theater) series. Cerwin-Vega AT-40 Technical Specifications checking the foam surrounds)

Even decades after their initial release around 1989, the Cerwin Vega AT-40 speakers remain a fantastic option for anyone building a budget-conscious, high-impact stereo system. Their specifications tell the story of a speaker that prioritizes efficiency, power handling, and deep, resonant bass above all else. While they demand a bit of TLC (namely, checking the foam surrounds), these vintage speakers offer a unique and thrilling listening experience that modern speakers often lack.

Woodgrain vinyl veneer over high-density particleboard/MDF Drivers (Speaker Components) Configuration: 3-Way Loudspeaker System

Many production runs of the AT-40 feature physical level-attenuation switches or dials on the rear (or front under the grille) terminal plate. These controls allow users to adjust the output of the midrange and tweeter independently. This is highly useful for taming bright treble or boosting vocal clarity depending on the room's acoustics. Tips for Modern Buyers and Restorers

The AT-40 was a key part of the middle tier of this series, which also included larger models like the AT-15 and AT-100. Its goal was to capture the "live music" energy Cerwin Vega was famous for in a floor-standing tower that was manageable in size for a typical living room.