That was the real work of the Vertex VX-351 programming software: not writing data, but writing order into chaos. And at 3:00 AM, with a casino running smoothly and fifty radios singing in perfect harmony, Jake Morrison finally felt the weight lift off his shoulders.
Windows automatically updated your driver to a version that disables counterfeit or older Prolific chips.
Here are the general steps to program the Vertex VX-351:
Note: This software is not freeware; it requires a legitimate license from Vertex Standard (now part of Motorola Solutions). vertex vx351 programming software work
The physical link is typically a (serial) or a USB-to-3.5mm jack programming cable. The USB versions are notorious for driver issues. Most modern cables use Prolific or FTDI chips; if you are using a cheap "knock-off" cable on Windows 10 or 11, the OS may automatically install a driver that disables the cable to prevent piracy. Success often requires manually "rolling back" the driver to an older version (usually from 2007 or 2008) to ensure the computer recognizes the radio as a valid COM port. The Programming Workflow
In the CE86 software, click the Radio menu and select Read (or click the green download arrow icon).
Open Device Manager, right-click your cable, select Update Driver -> Browse my computer -> Let me pick from a list , and select the older version. If Using an FTDI Chipset Cable That was the real work of the Vertex
If you have a pre-programmed radio and want to copy its settings to another VX-351 without a PC: Connect the two radios using a CT-27 cloning cable while powering both radios on. on the receiving radio (LED turns Green) and on the source radio (LED turns Red) to start the transfer. or a source to download the CE86 software Vertex Standard CE-86 VX-351 / VX-354 Programming Software
: CE86 Programming Software (compatible with Windows 2000 through Windows 10) .
You need a programming cable with a .
The software prompted: Connect Master Radio to PC, then connect Slave Radio via cloning cable. He unplugged the master, plugged in the first slave, and clicked . A status bar crawled across the screen:
Even with the right cable, the software won't "talk" to the radio unless the COM port settings match. Plug in your cable and open on your PC.