610 Programming Software: Hytera Tc

This write-up covers the essentials of the software, where to find it, and how to use it effectively.

: You will need the Hytera PC26 programming cable, which is a USB-to-serial 2-pin connector.

Plug the 2-pin connector firmly into the radio and tighten the retention screw.

The TC-610 supports:

Do you need assistance acquiring the of the software installer?

This guide covers everything you need to safely download, install, and configure your Hytera TC-610 walkie-talkie. Required Tools and Equipment

To avoid overwriting the radio's default settings, it's a good practice to first read the existing configuration. In the CPS, find and click the "Read" button. This will download all the current settings from your radio into the software. hytera tc 610 programming software

Windows 10/11 automatically updates drivers, which can break clone cables. Disable automatic driver updates or use a legacy driver (version 3.2.0.0) if your cable stops working.

: Turn the radio off, connect the programming cable to the accessory port, and then plug the cable into your computer.

Implementation notes

Locate the folder in the left-hand navigation tree. The TC-610 supports up to 16 channels. Click on a channel number to open its configuration matrix.

Save this original configuration file (.dat or legacy format) to your computer as a safety backup. 4. Customizing Radio Settings