After installing your USB cable driver, go to Device Manager > Ports (COM & LPT) . Right-click your USB Serial Port > Properties > Port Settings > Advanced. Change the COM Port Number to COM2 or COM3 .
Always click "Read" from the radio before making changes. This creates a backup of the current settings. Edit Channels:
The Icom IC-F310 is programmed using the programming software (typically v1.0, though later versions might exist). This Windows-based application allows users to configure frequency channels, tone signaling, scanning lists, and key assignments. Key Capabilities of the Software Icom Ic-f310 Programming Software
The most reliable way to program your radio is by using the proprietary software developed by Icom. However, Icom’s professional radios use a somewhat confusing naming convention for their software and tuning tools. There are two primary official software suites applicable to the IC-F310: and CS-F300/CS-F300S .
When you save a programming file from the software, it typically uses the extension. Understanding this file format is essential for saving, backing up, and transferring configurations between radios. After installing your USB cable driver, go to
This utility was originally developed as a native MS-DOS application . It does not run natively on modern 64-bit operating systems like Windows 10 or Windows 11.
Your USB-to-Serial adapter must be assigned to a low COM port number (usually COM1 or COM2) for the legacy software to recognize it. Open the Windows . Expand the Ports (COM & LPT) section. Right-click your USB serial adapter and select Properties . Always click "Read" from the radio before making changes
Depending on your region, ensure you are programming for 12.5 kHz spacing to meet modern regulatory standards.
Connect the radio to a stable 13.8V DC power supply and turn the radio . Step 3: Operating the CS-F300 Software
The primary cable required for the IC-F310 is the cloning cable. This cable connects the radio's microphone jack to a computer's serial (RS-232C) port. Many modern laptops lack DB9 serial ports, so you will likely need a USB-to-Serial adapter (using a chipset like FTDI or Prolific).
Q: What is the Icom IC-F310 programming software used for? A: The software is used to program and manage the settings of your IC-F310 radio.