This usually means the is mismatched. Ensure both the plotter (via its physical control panel) and the software are set to 9600. "USB Device Not Recognized"
Link it to the COM port you identified in the Device Manager. Option B: CorelDRAW Plugin (The Professional Choice)
Now that your Redsail cutting plotter software installation is complete, you can begin adjusting your blade depth and force settings for your specific vinyl materials.
Check the COM port settings. If using USB, ensure the USB-to-Serial converter driver is properly installed in the Device Manager. redsail cutting plotter software installation
If the plotter cuts the design, the installation is successful. Troubleshooting Common Installation Issues
If you can tell me which you have and what operating system (Windows 10, 11) you are using, I can provide more tailored instructions. Share public link
Inside the plugin interface, select your Redsail machine model. This usually means the is mismatched
: Set this to XON/XOFF (software flow control) to prevent data overflow during large cuts. Easy Cut Studio (Mac & Windows)
: A standard, budget-friendly option often bundled with Redsail machines.
Open WinPCSign and navigate to the or Plotter menu. Click on Plotter Setup . Select Redsail as your brand. Option B: CorelDRAW Plugin (The Professional Choice) Now
Many users prefer designing in CorelDRAW. Redsail provides a "CorelDRAW to Vinyl" plugin. Install the plugin provided by your distributor. A small Redsail icon or toolbar should appear in CorelDRAW.
The COM port is being used by another application. Close the software, restart the plotter, and try again.
The key to a perfect cut is finding the right balance between speed and pressure. The table below provides a starting point for different materials.
Ensure the USB key included with your ArtCut CD is plugged into the computer.