Press to set the Wake/Occupied 1 start time using the arrow keys.
Push any excess wire back into the wall cavity. Seal the hole in the wall with insulation or caulk to prevent drafts from affecting temperature readings.
Use the or Down arrow keys to adjust the hour. Ensure the AM/PM indicator is correct. Press the Clock button again. The minute digits will flash. Use the arrow keys to adjust the minutes.
: You can test the sensor with an ohmmeter. At 25°C (77°F), the resistance should be approximately 10k Ohms . Manual Resources
Users and technicians frequently cite its "trusted engineering standards," noting it is built for long-lasting performance in industrial and commercial settings. Programming:
Installing the Trane Baysens019c thermostat requires careful attention to detail to ensure proper function and safety. Follow these steps:
Proper wiring is critical for the BAYSENS019C. Because it uses serial communication, incorrect wiring can cause communication failures or prevent the HVAC unit from firing. Terminal Connections
The manual details both wall-mount and corner-mount options. It also includes a clear section on not mounting near supply air diffusers, windows, or exterior walls. This is standard, but Trane’s manual includes helpful diagrams showing dead zones.
