Smartpack2 Touch User Manual Jun 2026

: View current voltage, total load current, and battery charge/discharge rates.

The touch interface does not override physical safety.

Support for integration into high-level Network Management Systems. 🛠️ Maintenance and Updates

The Eltek Smartpack2 Touch is a 3.2-inch touchscreen controller for managing DC power systems, providing local monitoring, configuration, and Ethernet-based remote management. The system requires accompanying Basic and I/O units for full functionality, with key documentation covering installation, navigation, and configuration. Access the primary user guide for the Smartpack2 Touch Controller User's Guide - Smartpack2 Touch Controller 29-May-2018 — smartpack2 touch user manual

The SmartPack2 Touch features a high-resolution color display. It uses an intuitive icon-based menu system. Displays system status, voltage, and current.

Connect an Ethernet cable to the on the controller.

Configure parameters (e.g., Battery charge, Battery test settings, SNMP, Network). Logs: Review history of events, alarms, and performance. 5. Advanced Features & Configuration : View current voltage, total load current, and

To restore, navigate to the same menu, select , and choose your target configuration file. Updating Controller Firmware

The Smartpack2 Touch features an integrated web server that mirrors the controller's physical interface for off-site technicians.

Elevated ambient temperatures or a failing battery cell drawing excessive current. 🛠️ Maintenance and Updates The Eltek Smartpack2 Touch

Disclaimer: This article is a guide based on standard Eltek technical specifications. Always consult the original manufacturer documentation included with your hardware.

Always save your settings before making major system changes: Insert a FAT32-formatted USB drive into the front port. Go to . Select Export Configuration .

The Smartpack2 architecture separates the user interface from the control electronics. The Touch controller coordinates with the , which handles the actual power routing, rectifier control, and localized alarm relays. If the screen is damaged, the core system continues to run safely in the background. 2. Initial Setup and Navigation

Download the approved Smartpack2 Touch firmware binary file from Eltek. Save the file to the root directory of your USB drive. Insert the USB drive into the controller. Navigate to > Maintenance > Firmware Update . Select the correct file from the list and tap Execute .