These control the analog voltage output to the spindle drive.
: Grid shift amount for reference point return (Y-axis).
Related to tool length compensation (G43/G44) and cutter compensation (G41/G42).
To help narrow down your search or solve a specific machine issue, tell me: The your machine is showing. The specific parameter number you are trying to configure. fanuc 11m parameter list
Set up your PC DNC software to match the CNC settings (e.g., 9600 Baud, Even Parity, 7 Data Bits, 2 Stop Bits, XON/XOFF Handshaking). Set the PC DNC software to mode. On the FANUC 11M panel, select EDIT mode. Press the PARAM key to view the parameters.
Press the [SETTING] soft key, then find the PWE setting on the screen.
Home (datum) offset:
The FANUC 11M is an older, reliable control system. Parameters are grouped by function. Note that "Bit" parameters (0-7) are read right-to-left (e.g., Bit 0 is the rightmost digit).
Input and press the INPUT key. The machine will immediately trigger a flashing "PWE ALLOY" or "100 PWE ALARM". This is normal and indicates the memory is unlocked. Step 2: Navigate and Edit
Many Fanuc 11M parameters are "bit-type" parameters. A single parameter number contains 8 individual switches, numbered from 7 down to 0, reading from left to right: These control the analog voltage output to the spindle drive
Input values are measured in detection units (usually microns or tenths of a thousandth).
: Positive (+) Direction First Stroke Limit for each axis.
These control how the axes move, the maximum travel distance, and homing behavior. To help narrow down your search or solve