Ericsson Mini Link Cli Commands ^new^

MINI-LINK TN networks rely on plug-in units inside an Access Node Magazine (AMM). Managing these slots is crucial during hardware replacements.

: Elevates the session to Privileged Exec Mode (usually requires a password).

Commonly 10.0.0.1 or a custom management IP assigned by the network provider.

file list : Displays files stored on the local flash memory, including configuration scripts and backup software images. Best Practices for Using Ericsson MINI-LINK CLI ericsson mini link cli commands

configure station name "Site-Alpha-TN" exit

: Activates a loopback on a specific controller for path testing (use no loopback to disable). reload : Triggers a "warm restart" of the node. write : Saves the current configuration to permanent memory. DCN and Service Configuration

To force or restrict Adaptive Modulation (e.g., forcing the link to stay at a lower modulation for stability): MINI-LINK TN networks rely on plug-in units inside

copy : Used to move files, such as copying configurations or software loads to/from an FTP server.

To access the CLI, you can connect to the Node Processor Unit (NPU) via or SSH using a management IP address. Default Username : admin or admin_user . Default Password : ericsson or admin .

Before we dive into the commands, remember that Ericsson Mini-Link operates on a hierarchy of permissions. When you first log in via SSH or Telnet, you are in . To make configuration changes, you must enter Superuser Mode . Commonly 10

Access to the CLI is typically gained through a terminal emulator via Telnet, SSH, or a direct serial connection to the NPU unit. Default Password: Enable Privileged Mode: > enable Password: ericsson Use code with caution. Copied to clipboard Unlock Hidden Commands: (Use with caution for advanced debugging) # cliunlock Use code with caution. Copied to clipboard Essential CLI Commands Command Category Description System Info show board Displays serial, type, and software version of all boards show board 1/2 config

: Enters global configuration mode to modify node parameters.

show radio counters : Displays performance metrics like Errored Seconds (ES), Severely Errored Seconds (SES), and Received Signal Level (RSL) indications. 4. Networking & IP Configuration