Asus H81m-k Motherboard Setup Link

Check your case for pre-installed brass standoffs. Align them with the mounting holes on the Micro-ATX board. Screw in extra standoffs if necessary. 2. Securing the Board

Press → Select Yes → Enter.

Align the cooler push-pins with the four holes around the CPU socket.

Before starting, ensure your components meet the motherboard's specific requirements: asus h81m-k motherboard setup

: Connect to the two pins directly below the Power Switch.

2 x DIMM slots, maxing out at 16GB DDR3 (1600 / 1333 / 10600 MHz)

To enter the BIOS, press or Delete during startup. The ASUS UEFI BIOS offers two modes: Check your case for pre-installed brass standoffs

Snap the provided I/O shield into the back of your PC case.

Once the PC powers on, tap or Delete to enter the UEFI BIOS.

With the BIOS configured and the boot order set, your system will reboot into your OS installation media. Once the PC powers on

Setting up an ASUS H81M-K motherboard Go to product viewer dialog for this item.

Check the 24-pin and 4-pin ATX power cables. Ensure the power switch on the back of the PSU is turned "On" (I). Double-check the Power SW front panel pin alignment.