Avery Berkel L126 Calibration -

Press the Zero key on the front panel. The character on the screen will shift to a flashing E .

: This usually involves a specific key combination during the power-on self-test (countdown) or a physical "service switch" inside the casing to prevent unauthorized tampering. Configuration Check avery berkel l126 calibration

Press the TEST (Blue) button to enter the calibration function. Press the Zero key on the front panel

| Step | Action | |------|------------------------------------------------------------------------| | 1 | – Use a spirit level to confirm. | | 2 | Remove all items from the weighing platform – The scale must be empty and clean. | | 3 | Check load cell connections – Loose wiring or damaged load cells will prevent accurate calibration. | | 4 | Warm up the indicator – Allow the L126 to stabilise for at least 15–30 minutes before calibrating. | | 5 | Gather certified test weights – The total weight should be at least 50% of the scale’s capacity, preferably 100% for best accuracy. | | 6 | Know your service PIN/password – Have it ready (e.g., 0000 if unchanged). | Configuration Check Press the TEST (Blue) button to

The Avery Berkel L126 is often used in delis, butchers, and hardware stores where weights and measures laws apply.

The device will automatically cycle power, reboot, and enter normal weighing operation with your new operational profiles active. 🔍 Troubleshooting Calibration Faults Symptom / Error Potential Root Cause Corrective Action Hardware switch SW1 was not properly engaged or is damaged.