Satlink Ws 6906 Software Update Jun 2026

Connect your USB-to-RS232 cable to your PC. Open your Windows and check under "Ports (COM & LPT)" to ensure the cable is recognized. Note the assigned COM port number (e.g., COM3). If there is a yellow exclamation mark, download and install the Prolific or FTDI drivers corresponding to your cable. Step 2: Launch the Upgrade Tool Open the Satlink upgrade executable file on your computer. Step 3: Configure the Connection Settings Inside the upgrade tool interface: Select the correct COM Port noted in Step 1.

The is one of the most popular handheld satellite meters used by installers and hobbyists worldwide. It combines a signal meter, spectrum analyzer, and MPEG-4 player into a rugged, portable device. However, like any digital device, its performance depends heavily on up-to-date software.

Updated software helps the meter identify new satellites faster and more accurately. What You Will Need Satlink WS-6906 Meter: Fully charged or connected to power.

The Satlink WS-6906 is a portable digital satellite finder, also known as a satellite meter, designed to help users accurately align their satellite dishes for optimal reception. A key advantage is its built-in 3.5-inch color TFT LCD screen, which allows you to watch live free-to-air (FTA) channels and listen to their audio while aligning the dish. This feature makes the setup process much more intuitive, as you can see the picture quality improve in real-time as you adjust the dish. Satlink Ws 6906 Software Update

Download the official .bin file matching your exact hardware revision.

: This is the actual software binary, typically ending in a .bin or .abs extension. Ensure the description explicitly matches the WS-6906 model.

A .bin file containing the updated software or satellite data. Connect your USB-to-RS232 cable to your PC

It is recommended to perform a "Factory Reset" from the system menu to clear old cache data.

Click on the "Browse" or "Open" button within the software. Navigate to your computer's folders and select the downloaded Satlink WS-6906 .bin firmware file. Step 5: Initiate the Flash Ensure the Satlink WS-6906 is turned . Connect the data cable to the meter's serial port. Click Start or Next on the PC software interface. Flip the power switch on the Satlink WS-6906 to ON .

Ensure the COM port is correct. Try switching to a different USB-to-serial adapter if the current one is not recognized. If there is a yellow exclamation mark, download

Some newer hardware revisions or manuals mention the ability to update via a :

You must find the correct .bin file. It is recommended to check specialized satellite forums or contact the manufacturer. Download the ( .exe file) as well Satlink WS-6906 Software Upgrade Guide . 2. Connect the Device to the PC Connect the RS-232 cable to your PC's USB port.