Jby-6201 Manual [top] Instant

Swap the Yellow (constant 12V) and Red (switched accessory 12V) wire locations. Broken trigger connection or bad camera power.

Disconnect the negative terminal of your car battery to avoid accidental short-circuits.

Tap the toggle switch to turn on the wireless network adapter.

A: No. The JBY-6201 only counts size (width). It does not have a mixed-denomination face value counter. You must sort bills by type first. jby-6201 manual

Select the matching function icon on the touchscreen to "learn" the command. Core System Operations Resetting the Device

Pauses the counting cycle automatically once a pre-set number is reached (standard defaults are

: Standard continuous counting of bills . Swap the Yellow (constant 12V) and Red (switched

Your JBY-6201 uses an MCU to control hardware functions. To ensure features like steering wheel controls work correctly, you may need to configure the (Controller Area Network) settings in the head unit. In the extra settings menu, you can select a specific CAN Bus model that matches your car's make and model.

Ensure the GPS antenna puck is not obstructed by thick metal panels or structural reinforcement bars inside the dashboard. Excess cache accumulation or system error.

Before setting up your machine, check the packaging to ensure all standard components are present: Tap the toggle switch to turn on the

Bring the unit close to the dashboard cavity, mate the pre-wired main vehicle harness to the head unit, and slide the assembly into place. Fasten the framework securely to the car console using your vehicle's original mounting screws. Test the fitment of your dashboard trim panel before clicking it fully back into position. ⚙️ Initial Configuration and Network Setup

| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | | Blown fuse; loose wiring; incorrect wiring | Check the car's fuse box for a blown radio fuse. Verify all power (yellow), accessory (red), and ground (black) connections are secure at the back of the unit. | | No sound from speakers | Incorrect wiring; muted; external amp not on | Check speaker wire connections for secure fit and correct polarity. Ensure the unit is not muted and the volume is turned up. | | Bluetooth pairing fails | Phone not discoverable; wrong PIN; unit memory full | On phone, ensure Bluetooth is on and device is "discoverable." Try PIN 0000 . Delete old pairings from both devices and try again. | | Poor GPS signal | Antenna obstructed; poor antenna placement | Ensure the GPS antenna has a clear, unobstructed view of the sky. Relocate the antenna to a metal surface under the dashboard with the adhesive side facing up. | | Steering wheel controls don't work | Incorrect CAN Bus settings; wiring issue | In the head unit's factory settings, ensure the correct CAN Bus model for your car is selected and saved. | | Screen is frozen or unresponsive | Temporary software glitch | Perform a factory reset by long-pressing the physical reset button (often a small hole) or through the settings menu. | | Forgot the device password | User error | You will likely need to perform a factory reset to regain access. |

+---------------------------------------------------------+ | [ ANT ] [ USB 1 ] [ USB 2 ] [ POWER ] | | Radio Port 4-Pin Port 6-Pin Port 16-Pin Block| | | | [ GPS ] [ RCA I/O / CAM-IN ] [FUSE] | | Gold Thread 20-Pin Multi-Harness Block (10A) | +---------------------------------------------------------+ Main Power Harness (16-Pin Block) Key Pins