Immediately flush eyes with water for several minutes. Remove contact lenses if present and easy to do, then continue rinsing. Seek immediate medical attention. Skin Contact:
May cause respiratory irritation if mist is inhaled. Ingestion: Causes burns to mouth, throat, and stomach. Personal Protective Equipment (PPE)
Unneutralized Nalco 2584 residue exhibits the GHS characteristics of a due to its high corrosivity. Facilities must dispose of its contents and packaging containers in strict compliance with federal, regional, and municipal EPA guidelines. Never flush raw, untreated chemical runoff straight into public wastewater treatment networks or open environmental waterways. How to Obtain an Official Nalco 2584 SDS
NALCO 2584 is a high-performance chemical used primarily to adjust pH levels in industrial water systems, such as cooling towers or boilers. It is known for its effectiveness in maintaining system integrity by preventing scaling and corrosion.
Complies with 21 CFR 173.310 for boiler water additives. nalco 2584 sds
| | Chemical Formula | CAS Number | |---|---|---| | Sodium Hydroxide | NaOH | 1310-73-2 | | Potassium Hydroxide | KOH | 1310-58-3 |
Nalco 2584 Manufacturer: Nalco Water (An Ecolab Company) Common Use: Cooling water system treatment – scale and corrosion inhibitor.
Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide suitable for surrounding fires.
Large-scale releases of NALCO 2584 pose severe localized environmental hazards. If a leak occurs, ensure adequate ventilation, evacuate non-essential staff, and employ chemical-resistant barriers to keep the liquid from entering public waterways, sewers, or topsoil. Immediately flush eyes with water for several minutes
To help you get the exact details you need, could you specify:
Industrial facilities must deploy robust engineering controls to handle Nalco 2584 safely. General mechanical or is highly recommended to control airborne mist and vapor thresholds in confined chemical rooms. Required PPE Checklist
Causes severe, irreversible skin burns upon immediate contact.
Mark and Joe decided to dig deeper. They contacted the manufacturer, Ecolab, and asked for more information on the chemical's properties and potential risks. After several phone calls and emails, they finally received a response from a senior Ecolab representative. Skin Contact: May cause respiratory irritation if mist
Nalco Company (an Ecolab company), providing address, emergency contact numbers, and technical support lines.
Disclaimer: This article is for informational purposes only and does not replace the actual Safety Data Sheet provided by Nalco Water / Ecolab. Always consult the current, official SDS and your facility’s safety protocols. Chemical regulations (OSHA, EPA, DOT) vary by jurisdiction and may change without notice.
| | OSHA PEL | ACGIH TLV | |---|---|---| | Sodium Hydroxide | 2 mg/m³ (Ceiling) | 2 mg/m³ (Ceiling) | | Potassium Hydroxide | 2 mg/m³ (Ceiling) | 2 mg/m³ (Ceiling) |