A rotating knob that also functions as a button, used to scroll through menus and select settings.
Designed for use with R-410A and R-407C . Pressure Range: Minimum Pressure: 5 psi. Maximum Pressure: 600 psi. Adjustable Set Point: 20–60 psi.
A: Basic calibration (offset adjustment) is covered under Cor parameter. Full two-point calibration requires a certified reference sensor and is usually not described for field use.
Insert the board-to-board connector into the MT3021 module. Ensure the baffles line up with the slots.
Install the evaporator sensor on a copper tube roughly 5cm away from the evaporator inlet for accurate readings.
: Compatible with multi-circuit water-cooled, condenserless, and air-cooled screw chillers. 📥 Hardware Variants: MCQ vs. STD
: Do not install the module in environments with high humidity, excessive ambient temperature, corrosive chemical vapor, or strong electromagnetic interference.
Maintain a clear line of sight between the mouse and the receiver for the best 10m performance. 6. Troubleshooting Common Problems Mouse Not Working/No Response: Check Batteries: Replace with fresh AAA batteries.
A rotating knob that also functions as a button, used to scroll through menus and select settings.
Designed for use with R-410A and R-407C . Pressure Range: Minimum Pressure: 5 psi. Maximum Pressure: 600 psi. Adjustable Set Point: 20–60 psi.
A: Basic calibration (offset adjustment) is covered under Cor parameter. Full two-point calibration requires a certified reference sensor and is usually not described for field use. mt3021 manual
Insert the board-to-board connector into the MT3021 module. Ensure the baffles line up with the slots.
Install the evaporator sensor on a copper tube roughly 5cm away from the evaporator inlet for accurate readings. A rotating knob that also functions as a
: Compatible with multi-circuit water-cooled, condenserless, and air-cooled screw chillers. 📥 Hardware Variants: MCQ vs. STD
: Do not install the module in environments with high humidity, excessive ambient temperature, corrosive chemical vapor, or strong electromagnetic interference. Maximum Pressure: 600 psi
Maintain a clear line of sight between the mouse and the receiver for the best 10m performance. 6. Troubleshooting Common Problems Mouse Not Working/No Response: Check Batteries: Replace with fresh AAA batteries.