Hp Mu06 Notebook Battery Pinout Configuration (2025)

Always physically match the connector of your new battery with the old one before installation.

10.8V or 11.1V (Depending on the specific cells used). Fully Charged Voltage: ~12.6V. Capacity: Usually 4400 mAh to 5200 mAh (47 Wh to 57 Wh).

Are you planning a or trying to fix a laptop that won't turn on ?

This guide provides an in-depth breakdown of the HP MU06 battery pinout, its technical specifications, safety protocols, and testing methodologies. Technical Specifications of the HP MU06 Hp Mu06 Notebook Battery Pinout Configuration

: Standard 6-cell versions typically offer ~4000 mAh to 5200 mAh.

Below is the standard pinout configuration for the HP MU06 battery circuit.

The internal BMS has tripped a permanent failure flag (UVLO - Under-Voltage Lockout) due to dead cells or a short circuit. The pack is dead and unsafe to use. Safety Guidelines and Warning Always physically match the connector of your new

. Used to monitor the battery's internal temperature during charging. Pin 6: System Present / Control

This HP battery pack typically has 6 or 7 contact pins, but not all are always populated on every model. Their functions are:

Here's a consolidated table of the most common electrical and physical specs found across various HP MU06 battery models: Capacity: Usually 4400 mAh to 5200 mAh (47 Wh to 57 Wh)

A common symptom of BMS lockout is the charging indicator turning orange for 8 seconds followed by a white light, with Windows displaying “0% plugged in” but no actual charge occurring. This typically indicates that the BMS has entered a protection state, often triggered by deep discharge below the undervoltage threshold. In such cases, the BMS may have locked itself, and simply connecting a charger will not reset the protection. Jumpering power directly to the battery terminals is ineffective, as HP uses codes rather than simple high/low signals to activate the battery BMS.

and SMBC (Clock) utilize the I2C-based SMBus protocol.

The HP MU06 notebook battery Go to product viewer dialog for this item.

| Specification | Value/Information | | :--- | :--- | | | Lithium-Ion (Li-ion) | | Nominal Voltage | 10.8 V / 11.1 V | | Typical Capacity | 4400 mAh / 47Wh to 5200 mAh / 56Wh | | Cells Count | 6 Cells in a 3S2P configuration | | Dimensions (L x W x H) | Approx: 205mm x 53mm x 21mm (8.07" x 2.09" x 0.83") | | Weight | Approx: 317g (0.7 lbs) | | Safety | Built-in circuit protection against overcharge, over-discharge, and short circuits |

Modifying or manual-charging laptop batteries carries implicit hazards. Lithium-ion cells store significant energy density and can enter thermal runaway if mistreated.