The latest USB drivers are automatically bundled inside the installation directories of McgsPro and MCGS Embedded Configuration Software .
The standalone USB driver is normally bundled inside the core configuration utilities provided by the manufacturer.
Upon reboot, press 7 or F7 to choose . Re-run the MCGS USB driver installer. Hardware and Cable Verification mcgs hmi usb driver new
[PC] --- (USB Cable) --- [MCGS HMI Client Port] │ (Windows Device Manager Detects) │ [Unknown Device] 🟡 │ (Right-Click -> Update Driver) │ [Browse my computer for drivers] 📁 │ (Select 'Driver' Folder) │ [Device Recognized] 🟢
: Transfer your configuration files directly from your PC to the HMI via a USB/mini-USB cable. The latest USB drivers are automatically bundled inside
: Allows you to back up and restore HMI programs to your PC for safekeeping. How to Install the MCGS HMI USB Driver
Older MCGS panels (WinCE 5.0/6.0) still use the same USB VID/PID (VID_1A86, PID_7523). The new driver maintains backward compatibility. Re-run the MCGS USB driver installer
To resolve issues with the , you typically need to update the drivers manually via the Windows Device Manager or use a USB flash drive for direct project transfers. Common Solutions for USB Connectivity
If you continue to experience issues, reach out to your local MCGS distributor – but 95% of the time, the problem is either a faulty cable or a forgotten "Disable Driver Signature" step.
via Advanced Startup (F7/Key 7) before manual re-installation. Manual Update : If the automatic setup fails, go to Device Manager , right-click the unidentified USB device, and select "Update Driver"